Design of network port surge protection solution

In view of the surge protection requirements of the client network port (such as IEC 61000-4-5 standard), the following multi-level protection device combination is recommended to ensure that the surge test is passed and the back-end circuit is protected.

01  Core protection devices and their functions

02   Typical circuit design (taking RJ45 network port as an example)

Level 1 protection (GDT):
Connect a GDT in parallel between each pair of differential lines (such as TX+/TX-) and the ground to absorb lightning or EFT energy. Selection requirements: DC breakdown voltage ≥90V, current carrying capacity ≥5kA (8/20μs).

Secondary protection (TVS):
Use an integrated TVS array (such as RClamp0524P) to protect four pairs of differential lines, with a clamping voltage of ≤15V and a response time of <1ns to ensure that the residual voltage does not damage the PHY chip.

Common Mode Filtering (CMC):
Suppresses common mode noise caused by surges and improves signal integrity.

PoE Power Protection (PTC):
If PoE power supply is supported, connect a PTC in series in the power path to limit overcurrent.

Key Design Considerations

01 PCB layout optimization

The GDT/TVS should be as close to the network port as possible, with short and straight wiring to reduce parasitic inductance; the ground plane should be complete, and multi-point grounding should be used to reduce impedance.

02 Test Standard Match

Contact discharge: ±8kV (IEC 61000-4-2) requires TVS+CMC combination;
Surge test: ±4kV (IEC 61000-4-5) requires GDT+TVS two-level protection.

03 Device Selection Verification

Verify the TVS clamping characteristics through TLP testing; monitor the voltage on the PHY chip pin during actual surge to ensure that it is lower than the withstand voltage (e.g., a 3.3V PHY chip requires a residual voltage of <6V).

03 Recommended solution performance indicators

04 Costs and Alternatives

As a professional enterprise mainly engaged in network transformers, network interfaces and SFP connectors, Suzhou Wohu Electronic Technology Co., Ltd. is committed to providing customers with high-quality products and perfect technical support with its profound accumulation and professional technology in related fields. We look forward to working with you to jointly cope with various complex electromagnetic environment challenges, escort the safe and stable operation of your equipment, and create a better future together.